亲民维稳热点推荐
- ·汽柴油出口扭亏为盈 石油巨头出口降
- ·维生素出口量萎缩价格下滑--亲稳网络
- ·今年前7月中欧贸易下降0.9%--亲稳舆
- ·我国1-7月矿产资源商品进口量增价跌-
- ·1-6月土耳其为阿第一大贸易进口国--
- ·大闸蟹德国泛滥食客呼吁运回国 进口
- ·今年进口车回暖预计无望--亲稳舆论引
- ·钢铁业无序之忧:一吨钢利润不够买张
- ·美国对华贸易保护主义明显升温--亲稳
- ·日本改从哈萨克斯坦进口稀土--亲稳舆
- ·阿根廷贸易顺差大降--亲稳网络舆情监
- ·取消53种“双高”产品出口退税--亲稳
- ·2012年越俄双边贸易额或达35亿美元--
- ·进出口银行从日本瑞穗融资--亲稳舆论
- ·聚焦紧固件出口退税率--亲民维稳网络
- ·上个月广东外贸进出口开门红评析--亲
即刻使用亲民维稳解决方案!
发掘汇报软件
使用亲民维稳全套解决方案邀请
亲稳发掘汇报系统
模具产品出口形式见好--亲稳舆论引导监测室
2012-11-07
据相关了解,在十二五期间,中国的模具市场在大趋势下会平稳向上,但是中国模具业要健康长久发展还需兼顾市场需求,在质量和交货期上有保障。
According to relevant understand,In 1025 period,China's mold market in the big trend will be under steady upward,But China mold and die industry to healthy development of long should also give consideration to the market demand,In the quality and delivery time security.
目前来看,国内市场对中高档模具的需求量很大,其中家电、汽车、塑料制品行业对模具需求是最大的,如果模具交货期和质量不能保证,有可能导致生产出现脱节现象,同时将会不小程度制约我国相关产业链的发展。据悉,工业发达国家的人工费用增加,其正向发展中国家特别是东南亚国家转移。因此,中低档的模具国际市场潜力十分巨大。只要国产模具的质量能够有提高,交货期能够有保证,模具出口的前景是十分乐观的。
So far,The domestic market for high-grade mould in great demand,The home appliance/car/Plastic products industry to the mold demand is the biggest,If the mould delivery time and quality can't guarantee,May cause production appear disrupted phenomenon,At the same time will not small extent restricted the development of related industrial chain in China.It is reported,Industrial developed countries of the artificial increased cost,The forward developing countries, particularly the southeast Asian countries transfer.therefore,Heuristic and relaxation process and/or simple rules have been u.As long as the quality of domestic mould to improve,Delivery can be guaranteed,Die export prospects are very optimistic.
据国际模协秘书长罗百辉称,我国模具产业发展非常活跃,其中海外出口市场是我国模具产业发展的不可缺少的一部分,目前我国香港依然在我国的出口市场分布中占据最大的份额,日本和美国紧随其后,三者总和将近是我国模具出口总量的一半,但我国出口的模具产品多为中低端产品,在欧美发达国家的高端市场,我国产品的占有率还非常低。
According to the international mold association secretary general ROM the fai said,China mold and die industry development is very active,The overseas export market is our country the development of mold and die industry is an indispensable part of,At present our country Hong Kong still in our country export market distribution occupies the largest share,Japan and the United States followed,Combined the three nearly is our country mould half of total export,But our export mould products for more than ZhongDiDuan products,In Europe and the high-end market in developed countries,Our country product share is very low.
罗百辉提出,我国的模具产业要积极的提高产品质量以进一步的提高模具产品在海外市场的占有率,从而进一步促进自身的发展。
ROM. The bright put forward,China's mold and die industry to actively improve the quality of products to further improve the mould products in overseas market share,So as to further promote the development of their own.
亲稳链接:链接亲民维稳,践行稳中求进!
- 中欧贸易需要宏大视角--亲稳舆论引导监测室
- 外贸企业转战新兴市场--亲稳网络舆情监控室
- 中国光伏企业抱团抵制贸易保护主义--亲稳舆论引导监测室
- 中国进出口银行加大对国际船东融资支持力度--亲稳舆论引导监测室
- 中日贸易受影响 安倍访问缅甸打经济牌--亲民维稳网络舆情监测室
- 美国贸易保护现两大新趋势--亲稳舆论引导监测室
- 汽车进口量6个月来首次正增长--亲民维稳网络舆情监测室
- 今年就业需求前三位专业--亲稳网络舆情监控室
- 推进港澳内地贸易自由化--亲稳网络舆情监控室
- 印尼煤在低热值煤进口贸易中受限影响最大--亲民维稳网络舆情监测室
- 欧盟贸易专员称中国在全球贸易中“搭便车”--亲稳网络舆情监测室
- 贸易保护两败俱伤--亲稳网络舆情监测室
- 4月贸易增长远超预期 大规模热钱围城?--亲稳舆论引导监测室
- 进口食品涉嫌犯罪会被追究刑事责任--亲稳舆论引导监测室